Salt Indicator; Rinse Aid Indicator; Rinse Aid Indicator Setting; Starting Your Machine - Blomberg GSS9470X Instruction Manual

or functions from being changed and
disables the Start / Pause / Cancel
button (2).

Salt Indicator

Please check the salt indicator (16)
on the display to see whether there is
enough softening salt in your machine
or not. You need to refill the powder
dispenser whenever the salt warning
indicator light lights.
WARNING:
If the water hardness level is stored
as (r1), salt indicator will never come
on even if the salt container is empty.
(Adjusting the water hardness level is
explained in Water Softening System
section.)

Rinse Aid Indicator

Check the rinse aid warning display
(13) on the screen to find out if there
is sufficient amount of rinse aid in your
machine. You must refill the rinse aid
container when the rinse aid indicator
comes on.
WARNING:
If the Rinse Aid Indicator is set to
(OFF), rinse aid indicator will never
come on even if the rinse aid container
is empty.

Rinse Aid Indicator Setting

•
When your machine is switched
off, press Half Load ( ) button (5)
and then On / Off button (1) to
switch it on.
•
Half Load ( ) button (5) pressed
and release On / Off button (1).
•
Keep Half Load ( ) button (5)
pressed for three seconds more.
•
Rinse Aid Indicator (13) comes on
and the stored rinse aid indicator
status of your machine appears on
the display in the format of "ON" or
"OFF".
•
You can change the status of the
indicator as "ON" or "OFF" with
Start / Pause / Cancel button (2).
If you switch off the machine with
"On/Off" button (1) when the status
is "ON", then the rinse aid indicator
will come on when the rinse aid
level in your machine becomes
low while the machine is in use.
If you switch off the machine
with "On/Off" button (1) when the
status is "OFF", then the rinse aid
indicator will never come on.

Starting Your Machine

•
Plug the mains plug into the wall
socket.
•
Open the tap.
•
Open the door.
•
Place the dishes.
•
Check if the upper and lower
impellers rotate freely.
•
Put sufficient amount of detergent
in the detergent dispenser and
close its lid.
•
Press On/Off button.
•
Check if the salt and rinse aid
warning indicators (16,13) light
and add salt and/or rinse aid if
needed.
•
Determine your washing program
with the aid of the Program
Data and Table of Average
Consumption Values.
•
You can select the determined
washing program by pressing
program selection button (4).
•
You can see the program time in
the Remaining Time Indicator (3).
21 GB