Table of Contents
Advertisement
button (4). You can follow up the
program you are in from the program
indicator (9) on the screen. Program
number will increase by one each time
you press the program selection button
(Number of the defined programs can
change depending on the model you
have purchased). The selected
washing program will start running
when the Start / Pause / Cancel button
(2) is pressed
symbol (11) light up.
Time indicator (10) will start displaying
the estimated remaining time to the
end of program.
Total time can be different from
the time indicated at the beginning
since it can change while the
program is running, depending
on the temperature of the room
where your machine is installed,
temperature of the supply water,
auto-cleaning of the water softening
system (regeneration) and amount
of the dishes.
Adding Functions to the
Program
With the help of the add function
buttons, you can run the selected
program together with the Half Load
(1/2) (5), Combi Tablet (6) and Delayed
Start (7) functions.
You will obtain a better drying
performance if you select the Combi
Tablet function in cases where you use
a multi-purpose detergent.
To add a function to the program:
1.
Select the program by pressing
program selection button (4).
2.
Press the button of the function
that you want to enable and
check to see thee indicator for the
relevant function on the display.
3.
You can start the program by
pressing the Start / Pause / Cancel
button (2).
Program Steps Follow-up
You can follow up the step while
current program is running from the
Program Steps follow up indicator (18).
a Washing Step Indicator (18 a)
b Rinsing Step Indicator (18 b)
c Drying Step Indicator (18 c)
d End of Program Indicator (18 d)
The display shows the steps for
washing 18 a, rinsing 18 b and drying
18 c, respectively, while the selected
program is running. Only the End of
Program indicator 18 d lights up when
the program is over. Remaining Time
Indicator (3) displays "00:00".
Canceling a Program
Press Start / Pause / Cancel button (2)
for three seconds to cancel a program
that is already running. Release the
button when
flashing in the display. For a couple of
minutes the machine will fulfill the
necessary operations required for
cancellation. Remaining time indicator
(10) displays "00:00". You may select
and operate a new program following
the program cancellation process.
There might be residues of detergent
or rinse aid left in the machine and/or
on the pieces being washed depending
on the step the previous program was
in at the time of such cancellation.
Changing a Program
If you want to change running program,
first of all press Start / Pause / Cancel
button (2) to switch your machine into
pause mode. Second, switch to the
19 GB
symbol (11) start
Advertisement
Table of Contents
