Caller Id No./Did No./Pin No - Panasonic KX-TVA50 Programming Manual

2.4.1 Caller ID/DID/PIN Call Routing
3.
Click OK.
[Deleting a Call Routing Service]
1.
Select the desired Caller ID/DID/PIN number.
2.
Click Delete.
3.
Click Yes.
[Editing a Call Routing Service]
1.
Select the desired Caller ID/DID/PIN number.
2.
Click Edit....
3.
Edit parameters in the Edit Parameters dialog box.
4.
Click OK.
Note
•
DID setting is only available when the VPS is connected to one of the following PBXs using DPT
Integration.
–
KX-TD816 (P311Q or higher)
–
KX-TD1232 (P211Q or higher)
–
KX-TD500 (V4M or higher)
–
KX-TDE series
–
KX-TDA series
*1 except KX-TDA50

2.4.1.1 Caller ID No./DID No./PIN No.

Caller ID No./DID No./PIN No.
Specifies Caller ID/DID/PIN numbers so that callers are automatically forwarded to a preprogrammed
destination. The wild card " " can also be entered (see 2.4.1 Caller ID/DID/PIN Call Routing for examples).
For Caller ID numbers, "Private" and "Out of Area" callers can be specified.
Default
None
Value Range
Max. 20 digits consisting of 0–9 and " "
"Private" and "Out of Area" can also be assigned for Caller ID numbers
Feature Manual References
2.2.8 Caller ID Call Routing (APT/DPT Integration Only)
2.2.19 DID Call Routing (DPT Integration Only)
2.2.38 PIN Call Routing
Description
Specifies a name and/or description of the Caller ID/DID/PIN number.
Note
•
When no data is specified in this parameter, the caller's name will be automatically entered here if the
caller's name is received from the telephone company.
100 Programming Manual
(MPR Version 1.1 or higher)
*1
Document Version 3.0 2010/06