2.1.3 Mailbox Parameters
Programming Manual References
"Directory Listing" in 2.2.2 Personal Options
Feature Manual References
2.2.18 Dialing by Name
Password
Specifies the password needed to access the mailbox. If a default password is programmed by the System
Administrator, that password will be assigned automatically when creating all mailboxes. The System
Administrator can change and delete the password.
Follow the steps below to edit the password.
1.
Click Click to change password....
2.
Set the new password, or delete the current password.
To set a new password:
a.
Enter the new password, then re-enter the password for confirmation.
b.
Click OK, then click OK to close the Mailbox window.
To delete the current password:
a.
Click OK without entering a password.
b.
Click Yes when the warning is displayed, then click OK to close the Mailbox window.
Note
•
Each subscriber can change his or her mailbox password.
48
Programming Manual
Document Version 3.0 2010/06