Software CD-ROM Contents
The controller ships with three software CD-ROMs:
e-STUDIO Admin's Client CD-ROM
This CD-ROM includes the following Administration tools and
applications:
TOSHIBA's NDPS Gateway that enables Novell NDPS printing to the
controller.
Unix filters for printing from Sun Solaris, HP-UX, IBM AIX,
OpenUnix/SCO, and Linux operating systems.
MIB folder.
e-STUDIO Client CD-ROM
This CD-ROM includes the following client drivers and utilities:
TopAccessDocMon, the Windows-based job monitoring utility.
PCL6 printer drivers for the GL-1010 and GL-1020 controllers
through Windows 98/Me/2000, Windows NT, and Windows XP-based
workstations.
PostScript level 3 printer drivers for the GL-1010 and GL-1020
controllers through Windows 98/Me/2000, Windows NT, and
Windows XP-based workstations.
AGFA Font Manager and font collection.
Macintosh PPD files, which extends the LaserWriter driver to support
printing to the controller from Macintosh workstations.
e-STUDIO Recovery CD-ROM
This CD-ROM includes the following controller software:
The Operating System software, which enables you to recover the
controller's embedded Operating System in the event the internal
hard drive or files become corrupted or destroyed. Additionally, if you
have a previous version of the software installed, you can use this
CD-ROM to perform a version upgrade.
The controller software, which enables you to install or restore the
baseline software version on the controller.
xviii
GL-10x0 Administrator's Guide