Setting The Date And Time - Toshiba GL-1010 Administrator's Manual

Enabling /Disabling SSH
SSH stands for Secure SHell. When SSH is enabled, you can use an SSH
client to access the controller remotely, login, and execute commands
through a command line interface. SSH is disabled by default.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the Options area, click the
5 Select
6 Click

Setting the Date and Time

1 Log in as an administrator.
2 Click the
3 Click the
4 Under D
month, day, year, hour, minute, second, and AM or PM settings.
5 Click the
zone.
6 Check the
automatically adjust the controller time settings on the daylight
savings scheduled dates. Deselect to adjust time manually or for
areas not affected by Daylight Savings Time schedules.
7 Click
Note: When you perform this procedure, TopAccess synchronizes the
date and time settings of the controller with those of the copier.
To change the format of the date or time, see
Date and Time Formats
Reviewing the Device Version Properties
The Administration>Device page lets the administrator display and view
complete device version information for the various components.
1 Log in as an administrator.
2 Click the
98
link. The General Device page opens.
General
to enable SSH.
Enable
.
Save
tab.
Administration
subtab. The Device page opens.
Device
, click the drop-down menus and select the
T
ATE AND IME
drop-down menu and select the appropriate time
Time-Zone
Automatically Adjust for Daylight Savings Change
.
Save
tab.
Administration
subtab.
Device
drop-down list.
SSH
on page 71.
GL-10x0
box to
Setting the Default
Administrator's Guide