6-26-9. KY-614 Board
1. Remove the top panel. (Refer to Section 2-7-1.)
2. Remove the front panel. (Refer to Section 2-7-2.)
3. Remove the KY-616 board.
(Refer to Section 6-26-10.)
4. Remove the five screws and remove the KY-614
board.
5. Remove the harness from the connector (CN500) on
the KY-614 board.
Harness
6. Remove the two screws and remove the LCD
assembly.
7. Remove the two flexible card wires from the
connectors (CN200, CN201) on the KY-614 board.
8. Remove the five VR knobs.
9. Re-attach the parts in reverse order of the
disassembling procedure.
KY-614 board
VR knobs
CN201
LCD assembly
Flexible card wires
6-70
PSW3 x 8
PSW3 x 8
CN500
P3 x 8
KY-614 board
PSW2 x 5
CN200
6-26-10. KY-616 Board
1. Remove the top panel. (Refer to Section 2-7-1.)
2. Remove the front panel. (Refer to Section 2-7-2.)
3. Remove the four screws and remove the KY-616
board.
4. Re-attach the parts in reverse order of the
disassembling procedure.
KY-616 board
PSW3 x 8
PSW3 x 8
PSW3 x 8
HVR-1500