Easy Series (ICP-EZM2) | Installer Guide | 2.0 Installation
4. Connect the EZPS wires to the
control panel board.
5. Insert the door hinges onto the
enclosure.
6. Push the enclosure ground wire
connector onto the unpainted
part of the door's top hinge.
7. Connect the enclosure ground
wire to the threaded enclosure
stud.
8. Connect the enclosure ground
wire to the control panel
board's earth ground terminal.
20
5
8
Bosch Security Systems, Inc. | 5/07 | F01U025147-01
6
7
EZPS