Side Access Panel; Removing The Side Access Panel - HP xw4600 Service And Technical Reference Manual

2. Remove the screw attaching the lock to the chassis.
Figure 4-6

Side access panel

Before accessing the internal components of the workstation, the side access panel must be removed.
This section describes how to remove and replace the side access panel.

Removing the side access panel

To remove the side access panel:
WARNING!
powered off and that the power cord is disconnected from the electrical outlet.
1. Disconnect power from the system
(Predisassembly procedures on page
2. Unlock any locks that may be present (cable lock or padlock).
64 Chapter 4 Removal and replacement procedures
Removing the lock screws
Before removing the workstation side access panel, be sure that the workstation is
58).
ENWW