Siemens SICHARGE UC 150 UL Installation And Operation Manual page 65

Plug in the charging cable
Proceed as follows to plug in the charging cable:
1. Take the charging plug from the plug holder of the SICHARGE UC dispenser.
2. If you need more cable length, remove the cable from the cable holder.
3. Insert the charging plug into the vehicle's charging socket.
The electric vehicle automatically locks the plug-in connection between the charging cable and the electric vehicle.
Automatic start of the charging process
Once the plug-in connection is locked, the charging process starts automatically. The "Start" menu is displayed on the
SICHARGE UC dispenser HMI screen. Symbols in the status bar indicate the current vehicle status and connection status.
"Vehicle is charging" symbol
a
"Connection locked" symbol
s
Figure 8-1 Status bar
Installation and Operations Manual | SICHARGE UC 150 UL Plug-in Dispenser
65