Yamaha FLIP-X Series Maintenance Manual page 90

6 Loosen the coupling mounting bolt.
Loosen the coupling mounting bolt (1).
n
NOTE
Do not remove the coupling mounting bolt. (Just
loosen the bolt.)
7 Remove the motor.
Remove the screws (4) securing the motor
and remove the motor.
n
NOTE
4
Do not remove the screws securing the motor unit.
8 Install a new motor.
9 Assemble in the reverse order of
disassembly (Step 7 → Step 4).
4-16
Step 6
53403-AN-00
Step 7
53404-AN-00
Motor unit securing screws
(Do not remove the screws.)
Loosening the coupling mounting bolt
Removing the motor
Motor Motor
Motor unit securing screws
(Do not remove the screws.)