Command Index and Defaults
FACTORY OPTION SET # 6
(Asynchronous 4-wire Leased Line without V.42 Bis Protocol) (AT&F6)
• MODEM OPTIONS
DCE rate - 28800
V.34 modulation *
V.34 rate threshold low *
V.34 asymmetric rate enabled
Normal originate
Fast train disabled
Auto retrain enabled
Sq auto rate disabled
Transmit clock internal
Leased line, 4-wire *
Transmit level - 0 dBm*
Dial backup manual *
Lookback timer - 15 min *
Jack type RJ11 (permissive)
Line current disconnect long
Long space disconnect enabled
V.22 guard tone disabled
• PROTOCOL OPTIONS
LAPM protocol disabled *
MNP protocol disabled *
Normal buffer mode
Constant DTE speed
DTE flow control disabled *
DCE flow control disabled *
XON/XOFF pass through disabled
Inactivity timer off
Break control 0 *
V.42 fast detect enabled
• SPEAKER OPTIONS
Volume medium
On until carrier detect
* Indicates variation from factory option set #1
E-24
•
TEST OPTIONS
Bilateral analog loop disabled
Bilateral digital loop disabled
DTE local test disabled
DTE remote test disabled
Remote commanded test enabled
Test timeout off
•
DIAL LINE OPTIONS
Tone dial
Auto dial #1
Wait for dial tone
Wait delay 2 seconds
Pause delay 2 seconds
Call timeout 30 seconds
Answer on 1 ring
801 V.32 timeout long
Autocallback disabled
•
DTE OPTIONS
Async data
DTE rate - 9600
8 bit, No parity
AT command set enabled
Ignores DTR
DSR forced high
DCD forced high
CTS forced high
DTE fallback disabled
Options retained at disconnect
V.3400