Table of Contents
Advertisement
Command Index and Defaults
FACTORY OPTION SET # 4
(Synchronous 4-wire Leased Line) (AT&F4)
• MODEM OPTIONS
DCE rate - 28800
V.34 modulation *
V.34 rate threshold low *
V.34 asymmetric rate enabled
Normal originate
Fast train disabled
Auto retrain enabled
Sq auto rate disabled
Transmit clock internal
Leased line *
4-wire *
Transmit level - 0 dBm *
Dial backup manual *
Lookback timer - 15 min *
Jack type RJ11 (permissive)
Line current disconnect long
Long space disconnect enabled
V.22 guard tone disabled
• PROTOCOL OPTIONS
LAPM protocol disabled *
MNP protocol disabled *
Direct buffer mode *
DTE flow control disabled *
DCE flow control disabled *
XON/XOFF pass through disabled
Inactivity timer off
Break control 0 *
V.42 fast detect disabled *
• SPEAKER OPTIONS
Volume medium
On until carrier detect
* Indicates variation from factory option set #1
E-22
•
TEST OPTIONS
Bilateral analog loop enabled *
Bilateral digital loop enabled *
DTE local test disabled
DTE remote test disabled
Remote commanded test enabled
Test timeout off
•
DIAL LINE OPTIONS
Tone dial
Auto dial #1
Wait for dial tone
Wait delay 2 seconds
Pause delay 2 seconds
Call timeout 60 seconds *
Answer on 1 ring
801 V.32 timeout long
Autocallback disabled
•
DTE OPTIONS
Sync data *
AT command set disabled *
Ignores DTR
DSR normal *
DCD normal *
CTS follows RTS *
RTS/CTS delay 0 ms *
DTE fallback disabled
Options retained at disconnect
V.3400
Advertisement
Table of Contents
