Sony SIR-1000W Instruction Manual page 29

LCD Screen
#£
#™
#¡
OVR
dB %
OVR
+2
+100
0
#¶
–6
0
-20
-40 -100
OVR
CH 1 - 4 5 - 8 9-12 13-16
S I R -1000W
#¡ OVR LED
Lights when over-ranging occurred in any channel in the E-E, REC-PAUSE, REC or
FWD mode.
#™ SPD LEDs
These LEDs indicate the tape speed set for the recorder. The LED of the selected speed
(1, 1/2, 1/4, 1/8, or 1/16) lights.
#£ AUX LEDs (1, 2)
• When a signal (TTL level) is input to the AUX-1 (DIGITAL) IN connector, or when
the recorded signal is played back, the "1" LED lights.
• When a signal (more than ±0.2 Vpk) is input to the AUX-2 (IRIG-B) IN connector,
the "2" LED lights.
#¢ EXP LED
Lights when a channel expansion unit is connected and enabled according to the
channel mode (16-channel mode).
#∞ SYN LED
When multiple recorders are operating in synchronizing mode, the SYN LED lights or
blinks according to the states of the recorders.
#§ EXT TC LED
Lights when the IRIG-B time code signal input from an external time code generator
is successfully detected, or during playback of the IRIG-B time code signal recorded
on the tape.
1 1/2 1/4 1/8 1/16 1 2 EXP SYN
SPD AUX
M O N I
CH
ADDRESS REMAIN
Y
H
PK-CLR ALL CH SELECT
EXT TC
ID CAUTION
R A N G E S P E E D
X 1 /
V
S - T I M E
T - T I M E
M D
M S
L O A D CLOCK
#¢
#∞
#•
#§
#ª
$™
$£
$¡
$º
3-15