Toshiba Strata DK 16 Installation And Maintenance Manual page 307

STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 55
Press CR.
3
Enter Modified Digits Table Number
Refer to the System Record Sheet and enter the modified
digits table number (1 ~ 6).
Example: Enter modified digits table number 1, enter 1.
4 Enter Code 0
The system will display any previously entered number of
digits to be deleted (01 ~ 10).
Refer to the System Record Sheet and change number if required.
Example: Change to 10, enter: 1 0.
5 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all data has been entered
for this program.
C) To exit this program, press # # CR.
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-BH
PROGRAM 55-0
LCR MODIFIED DIGITS-DELETE
ACTION
-57-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
>MODE PROG
P
P 55
P55
P55 1
P55 10 05 10
P55 10 05 10
P55 ##
P