Panasonic LP-V Series Operation And Maintenance Manual page 160

⿎ Serial Data
The serial data function is convenient for changing the marking character string at every marking by the Serial
communication command. Set the "Serial Data No." and "Figure".
For communication command for marking character string using the serial data function, refer to External Control Manual.
Reference
• Serial data marking function cannot be used in combination with rank marking, external offset, and equidistant marking
on the flying object.
1.
Press [FUNC. CHAR.] (FUNCTION CHARACTER).
2.
Press [DATA].
Select the serial data No. and the display
figure.
3.
Press [INPUT] and then, press [SET].
When setting the serial data function, the circle
symbols with the specified number of digits appear on
the image display.
When it is set in the bar code or 2D code data, the
code symbol is generated with the specified digits of
"0" on the image display.
Description
Serial Data No.:
Setting Range 0 to 15
Number of Display Figure:
Set the max. number of the characters that will be input by the serial communication.
If the specified digit number and the character digits set by the communication command are different, the
communication command setting is valid for the character digits.
Setting Range 1 to 30
Character strings to represent the functional characters of serial data character
%MM:Sn : Serial data character
Item Displayed characters
MM 01 to 30
n Represents the setting number of serial data character
0 to 9
A to F
160
Description
Represents the number of max. character digits to be input as serial data character.
Serial data No. 0 to Serial data No. 9
Serial data No. 10 to Serial data No. 15
ME-LP400V-OP-6