Appendix C. Updating the moisture.IQ Firmware
C.1 Updating the Chassis Firmware
1. Power on the moisture.IQ.
2. Load the updated firmware into the UPDATE folder on the USB flash drive.
3. Plug the USB flash drive (with the software update) into the moisture.IQ (see Figure 84 for
Rack/Bench/Panel Mount, Figure 85 for Weatherproof/Explosion-Proof).
moisture.IQ User's Manual
Figure 84: USB Flash Drive Plugged into Rear of Chassis
Figure 85: USB Flash Drive Plugged into Chassis Inside the Door
Appendix C. Updating the moisture.IQ Firmware
117