Figure 7-1 Encapsulation Format Of Martinioe - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
The port needs to process different types of packets in different ways, so you need to set the port
to a PE port or a P port. The PE port is not configured with the encapsulation format, while the
P port is configured with the encapsulation format. The P port indicates a port for connecting
the equipment of the network provider, so the P port receives data packets in the MPLS
encapsulation format. You can set the packet encapsulation format of the P port by running the
configuration command.
Impact on the System
If the encapsulation format of the data packet that enters the port is inconsistent with the
configured encapsulation format of the port, the data packet is discarded.
Values
Value Range
MartinioE, stack VLAN
The following table lists the description of each value.
Value
MartinioE
Stack VLAN
Configuration Guidelines
The user can choose an encapsulation format according to the requirements of the service.
Different encapsulation formats support different types of data packets. When the encapsulation
format is inconsistent with the type of the receive data packet, the data packet is discarded. When
configuring services, the user needs to make sure that the encapsulation format of the port is
consistent with the type of the data packet that is transmitted by the interconnected equipment.
Relationship with Other Parameters
None.
Related Information

Figure 7-1 Encapsulation format of MartinioE

DA SA
6
Issue 02 (2011-06-30)
Description
Figure 7-1
MartinioE.
Figure 7-2
VLAN.
0x8847
6 2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
MartinioE
shows the encapsulation format of
shows the encapsulation format of Stack
Tunnel VC
4 4
7 List of Parameters
Ethernet Data
N
7-29