Siemens sinumerik 840D sl Function Manual page 309

Programming with CPLA and CPDEL
Syntax:
Identifiers:
Functionality:
Leading
axis/spindle:
Example:
CPDEL=(X2) CPLA[X2]=(X1)
Boundary conditions
• CPLDEF is only allowed in blocks without CPDEF/CPON/CPOF/CPDEL.
• If an active leading axis is deleted, the coupling to this leading axis is implicitly
• Deletion of the last leading axis results in the entire coupling module to be deleted.
Special functions: Axis Couplings and ESR (M3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
CPLA[FAx]= (<leading axis/spindle>)
Coupling Lead Axis
Deleting a leading axis/spindle: The leading axis/spindle module will be
deleted and the corresponding memory will be released. If the coupling
module does not have a leading axis/spindle any more, the coupling
module will be deleted and the memory will be released.
Type: AXIS
Range of
values:
(This limitation applies to the case where the keywords refer to the same coupling
module.)
deactivated.
All defined axis and spindle identifiers in the channel
; Deletion of leading axis X1 of the coupling to following axis
X2.
Detailed description
2.5 Generic coupling
89