Adding Onus To The Olt And Configuring The Management Service Port - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Add ONUs to OLT-A and
configure the service port
transmitting services
Configure the TDM VCL
and CESoP connection
Configure the static LSP
and PW on the CX600

14.4.7.3 Adding ONUs to the OLT and Configuring the Management Service Port

Services can be configured for an ONU only after the ONU is successfully added to the OLT.
Context
l
l
Data Plan
Table 14-11 Key data plan
Item
DBA profile
Issue 01 (2014-04-30)
Start
for transparently
on the ONU
Configure clock
synchronization
Verify services
End
When an ONU is added, related profiles need to be bound to the ONU, including the
dynamic bandwidth allocation (DBA) profile, line profile, and alarm profile.
An ONU can be added in two modes: adding an ONU offline and confirming an ONU
online. Select either mode as required.
Data
Profile ID: 21
Profile type: fixed bandwidth and minimum delay mode
DBA bandwidth: 28928 kbit/s (assume that 4 E1 private lines are connected
to 1 ONU and each E1 private line is configured with a bandwidth of 7232
kbit/s)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 FTTM Configuration (Base Station Access)
OLT-A
ONU
CX600
OLT-A/
ONU/CX600
1487