Configuring Link Aggregation, Congestion Control, And Security Policy - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Networking Scenario
FTTB/FTTC+HGW
networking (HGW providing
the VoIP service)

11.4.1.7 Configuring Link Aggregation, Congestion Control, and Security Policy

The global configuration of upstream link aggregation and queue scheduling based on priorities
ensures service reliability. The global configuration of security policies ensures service security.
Context
Link aggregation provides a higher bandwidth and uplink reliability for optical line terminals
(OLTs) by aggregating multiple uplink Ethernet ports to one link aggregation group (LAG).
Link aggregation is recommended.
Congestion control places the packets to be sent from a port into multiple queues that are marked
with different priorities. Then, the packets are sent based on queue priorities. Congestion control
is recommended.
Security policies ensure system, user, and service security.
Issue 01 (2014-04-30)
Data Plan and Configuration Procedure
For details, see:
l 11.3.4.8 Configuring the Internet Access Service
(VDSL2 Access, on the ONU)
The configurations in steps 3 and 4 are modified as
follows (the configurations in other steps remain
unchanged):
– 3. Create an S-VLAN.
– 4. Add service ports.
l 11.3.2.8 (Optional) Configuring Vectoring
l 11.3.2.9 Configuring H.248 Voice Service (on the
ONU)
l 11.3.2.10 Configuring SIP Voice Service (on the ONU)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Configure stacking S-VLAN 1001 for the ONU and
add uplink port 0/0/1 to the VLAN.
huawei(config)#vlan 1001 smart
huawei(config)#vlan attrib 1001 stacking
huawei(config)#port vlan 1001 0/0 1
VDSL2 mode PTM and untagged user packets are
used as an example. Add a service port for the users
connected to ports 0/1/0 and 0/1/1, respectively.
huawei(config)#service-port 101 vlan 1001
vdsl mode ptm 0/1/0 multi-service user
-vlan untagged tag-transform add-double inner-
vlan 2 rx-cttr 8 tx-cttr 8
differentiated by C-VLAN (inner-vlan).
Therefore, the C-VLAN (inner-vlan) of each
user must be unique.
huawei(config)#service-port 102 vlan 1001
vdsl mode ptm 0/1/1 multi-service user
-vlan untagged tag-transform add-double inner-
vlan 3 rx-cttr 8 tx-cttr 8
//Users are
1039