Traverse Log; Open Ascii Editor; Set Up Logical Drives - Siemens SINUMERIK 840D Operator's Manual

9
03.04

9.5.2 Traverse log

Traverse
log
OK

9.5.3 Open ASCII editor

Editor
DOS
SHELL
9.6

Set up logical drives

Logical
drives
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
When you press the softkey, a screen is opened for setting
parameters and activating the action log. You can make and save the
following settings:
•
Switch the logging process ON/OFF
Log on:
•
Select the data you want to log:
Interrupts
Keys
channel status/override,
Windows IDs
You can save the settings via the vertical softkeys.
For service only!
Go to the ASCII editor to display the files at DOS level.
For service only!
Go to the DOS level.
Function
Connections for a Compact Flash Card, Floppy, and network can be
used on the PCU 20 by means of logical drive definitions.
This "Logical drive" function is the "Manage network/disk drive on the
PCU 20" option.
In addition to the "NC" softkey, via which the NC main memory data
can be displayed, a further 4 connections can be set up. These user-
configured softkeys can be used to display directories and programs
e.g. on disks, network drives and compact flash cards, or in the OEM
memory.
These softkeys are available in the "Program" and "Services"
operating areas.
Start-Up Operating Area

9.6 Set up logical drives

9
9-305