Advertisement
To Return To The Default Home Page In Your TouchCenter Keypad
To return to the Default Home Page in your TouchCenter Keypad, proceed as follows:
1. Open the door located on the top side of the
TouchCenter keypad as shown below.
2. Insert the MMC/SD card that contains your Custom
Home Screen into the TouchCenter with the contacts
at the bottom and facing the front of the
TouchCenter. Press the card in a downward direction
until it latches into the slot.
3. From the Home screen, advance to the "Advanced Setup" menu screen by pressing the following buttons
and codes as displayed;
SECURITY > MORE CHOICES > SETUP > ADVANCED SETUP > Enter Authorized Code
4. Press the KEYPAD RESET Button. You will be asked if you wish to do a Processor Reset.
5. Press OK. You will see a message that the "System is
Resetting" followed by the HOMEPAGE DOWNLOAD
PROGRAM screen.
NOTES:
• If the TouchCenter has been programmed for
supervised operation, the system will report a
trouble during the Custom Screen Installation
and Reset process.
• The system will not report alarms during the
Custom Screen Installation and Reset process.
6. To return to your default home page, press DEFAULT
HOME PAGE. You will receive a "Started" message
followed by a "Completed" message when the default
home page has been reloaded.
32 MB
CARD
WALL
SURFACE
TOUCHCENTER
– 4 –
INSERT WITH
LABEL TO
REAR
WALL
MOUNTING
PLATE
6271CV-010-V0
Advertisement
