Makita 2414EN Instruction Manual
Hide thumbs Also See for 2414EN:

Advertisement

INSTRUCTION MANUAL
Portable Cut-Off
2414EN
013127
DOUBLE INSULATION
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Summary of Contents for Makita 2414EN

  • Page 1 INSTRUCTION MANUAL Portable Cut-Off 2414EN 013127 DOUBLE INSULATION IMPORTANT: Read Before Using.
  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model 2414EN Wheel diameter 355 mm Hole diameter 25.4 mm No load speed (min 3,800 Dimensions (L x W x H) With under cover 500 mm x 280 mm x 620 mm With European type safety Net weight 17.6 kg...
  • Page 3 Store idle tools. Makita Corporation responsible When not in use, tools should be stored in a dry, manufacturer declare that the following Makita high or locked up place, out of reach of children. machine(s): Do not force the tool. Designation of Machine:...
  • Page 4 15. Disconnect tools. only fiberglass-reinforced cut-off wheels. When not in use, before servicing and when Check the wheel carefully for cracks or changing accessories such as blades, bits and damage before operation. Replace cracked or cutters. damaged wheel immediately. 16. Remove adjusting keys and wrenches. Secure the wheel carefully.
  • Page 5: Installation

    Spark guard INSTALLATION 1. Screw Securing cut-off 2. Spark guard 1. Base 2. Bolt holes 013130 The spark guard is factory-installed with its lower edge contacting the base. Operating the tool in this position 013128 will cause many sparks to fly around. Loosen the screw This tool should be bolted with two bolts to a level and and adjust the spark guard to a position at which stable surface using the bolt holes provided in the tool's...
  • Page 6 Setting for desired cutting angle 1. Socket wrench 2. Guide plate 3. Hex bolts 013148 013132 To change the cutting angle, follow the procedure below: Loosen the two hex bolts. Set the guide plate to the desired angle (0° - 45°). For more accurate angle, use a protractor or triangle ruler.
  • Page 7: Operation

    Always use only the proper inner and outer • 1. Guide plate flanges which are provided with this tool. 2. Straight piece of Always lower the safety guard after replacing the • wood (Spacer) wheel. 3. Over 45 mm Securing workpiece long 4.
  • Page 8: Maintenance

    Be sure to close and secure the under cover with the wing bolt after the removal of dust. Carrying tool 013139 To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 013138...
  • Page 9: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Abrasive cut-off wheels • Socket wrench 17 • NOTE: Some items in the list may be included in the tool •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 885152-222...

Table of Contents