Show System - Dell Z9500 Command Reference Manual

0x00000001
Dell# show software ifm linecard 0 | save flash://
sh_sf_ifm_linecard0
Start saving show command report .......

show system

Display operational information on all ports or a specified line card.
Z9500
Syntax
show system [brief | linecard slot-id]
Parameters
brief
linecard slot-id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.4
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Control and Monitoring
ppStatus[0] = 0x00000001
(OPTIONAL) Enter the keyword brief to view an
abbreviated list of system information.
(OPTIONAL) Enter the keyword linecard and a slot number
to identify the switch ports. The slot ID range is from 0 to 2.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-
type command. Modified the show system stack-unit
command output to support Piece Part ID (PPID).
Introduced on the Z9000.
Introduced on the S4810.
The Boot Flash field displays the code level for boot code
2.8.1.1 and newer, while older boot codes display as
"Present".
Added Master Priority field.
ppStatus[1] =
171