Show Switchport Protected; Show System Internal Pktmgr - Dell Networking 2024 Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example assigns the name "protected" to group 1.
console(config-if-Gi1/0/1)#switchport protected 1 name protected

show switchport protected

Use the show switchport protected command in Privileged EXEC mode to
display the status of all the interfaces, including protected and unprotected
interfaces.
Syntax
show switchport protected
groupid — Identifies which group the port is to be protected in.
•
(Range: 0–2)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example identifies test as the protected group.
console#show switchport protected 0
Name......................................... test

show system internal pktmgr

Use the show system internal pktmgr command to display the configured
CPU rate limit for unknown packets in packets per second.
410
Ethernet Configuration Commands
groupid