Ip Access-Group (Acl Vlan Group) - Dell Z9500 Command Reference Manual

ip access-group (ACL VLAN Group)

Apply an egress IP ACL to the ACL VLAN group.
Syntax
ip access-group access-list-name out implicit-permit
Parameters
access-list-
name
out
implicit-permit
Default None
Command ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Modes
Command
Version
History
9.5(0.0)
9.3(0.0)
Usage You can apply only an egress IP ACL on an ACL VLAN group.
Information
member vlan (ACL VLAN Group)
Add VLAN members to an ACL VLAN group.
Syntax
member vlan {VLAN-range}
Parameters
VLAN-range
Default None
266
Enter the name of the egress IP ACL to be applied to
member interfaces of the VLAN group (140 characters
maximum).
Enter the keyword out to apply the ACL to outgoing traffic.
Enter the keyword implicit-permit to change the default
action of the ACL from implicit-deny to implicit-permit (that
is, if the traffic does not match the filters in the ACL, the
traffic is permitted instead of dropped).
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, and Z9000.
Enter the member VLANs using comma-separated VLAN IDs,
a range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Access Control Lists (ACL)