Table 21: Dvr/Hard Drive Status Diagnostic Field Descriptions - Arris DCX3520e-M Installation Manual

Diagnostics

Table 21: DVR/Hard Drive Status Diagnostic Field Descriptions

Field Description
Enabled Indicates whether the DVR is enabled, based on the DCX3520e-M Connected State (CONNECTED or
DISCONNECTED) and resource availability (resource authorized; hard disk installed and functional):
OSD
True
Front Panel
False
Stream Indexer The stream indexer version number, without leading zeros; for example, version 0000000065 is
Ver. displayed as 65.
Content Record The content record version number, displayed without leading zeros.
Ver.
Encoder Not Installed
Encoder
Number Encoder Not Installed
Type Encoder Not Installed
Quality Encoder Not Installed
Drive The drive type — IDE or NOT
AVAILABLE (neither enabled
nor configured).
Record Capacity The remaining recording
Remaining capacity, in bytes.
Number of The number of internal and external hard drives, up to a maximum of 9.
Installed Drives
Drive The identification number sequentially assigned to each installed drive and whether the drive is
Internal or External.
Model Number The drive model number assigned at the factory.
Device ID A text string of up to 20 characters that identifies the disk drive; N/A is displayed if the value is invalid
or cannot be retrieved.
Type The drive type — IDE, USB, or Unknown.
Total Size The drive size in decimal GB. (1 decimal GB = 1 x 109 bytes. For example, 120 decimal GB = 120 x 109
bytes.)
System, GPFS, The space used and allocated in MB for each of the internal hard drive's partitions — System, GPFS,
DVR Content, and DVR Index (1 binary MB = 220 bytes). N/A displays if the value is invalid or cannot be
DVR Content, and
retrieved.
DVR Index
High-Definition DVR DCX3520e-M • Installation Manual
365-095-25080-x.1
Front panel
En
OSD
Un
Description
DVR enabled
Description
DVR disabled
72