Advertisement
Installing or removing battery cartridge
0
Always switch off the tool before insertion or removal of the battery cartridge.
.To remove the battery cartridge, pull out
the set plate on the bottom of the tool
and grasp both sides of the cartridge
while withdrawing
it
from the barrel.
.To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip
it
into
place. Snap the
set
plate back into place.
Be sure to close the
set
plate fully before
using the tool.
0
Do not use force when inserting the battery cartridge.
I f the cartridge does not slide in easily,
it
is not being inserted correctly.
Charging
.Plug
the
f a s t
charger into your power
source. Insert the battery cartridge so
that the plus and minus terminals on the
battery cartridge are on the same sides
as their respective markings on the fast
charger. insert cartridge fully into the
port so that it rests on the charger port
floor.
Fig.
1
CAUTION :
.Your new battery cartridge is not charged. You will need to charge it before use.
0
I f you try to charge
a
cartridge from
a
just-operated tool, sometimes the charging light
will not come on after you insert
a
cartridge from
a
just operated tool. L e t the cartridge
cool off for
a
while. Then re-insert
it
and try to charge it once more.
0
If you wish to charge two battery cartridges, allow 15 minutes between chargings on the
fast charger.
6
Advertisement
