Makita RBC25A Instruction Manual page 3

23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
Use only replacement parts that are identical to original equipment parts when servicing the unit: these
parts are available
from
your dealer. The use of any other accessory or attachment may create a
potential hazard, injury to the user and damage to the machine.
Clean the machine completely, especially
t h e
fuel tank cap,
its
surroundings, and
the
air cleaner.
When refueling, be sure to stop the engine and confirm that it has cooled down. Never refuel when the
engine i s running or hot. When gasoline
spills,
be sure to completely wipe it away and properly dispose of
those materials before starting the engine.
Stay clear o f other workers or bystanders.
When approaching an operator o f the machine, carefully call
his
attention and confirm that the operator
stops the engine. Be careful not to startle or distract the operator causing an unsafe situation.
Never touch the nylon cutting head while the engine is running.
If
it
is necessary to adjust the protector or
nylon cutting head, be sure to stop
the
engine and confirm that the nylon cutting head has stopped
turning.
The
engine should be turned off when the machine is moved between work areas.
Be careful not to
hit the
nylon cutting head against stones, or the ground. Unreasonably rough operation
will shorten the life
of the machine as well a s create an unsafe environment for you and those around you.
Pay attention to loosening and overheating o f parts.
If
there is any abnormality of the machine, stop
operation immediately and check the machine carefully.
If
necessary, have the machine serviced
by
a
qualified service facility. Never continue to operate a machine which may be malfunctioning.
In
startup or during operation o f the engine, never touch hot parts such as the muffler, the high-voltage
wire or the spark
plug.
For a while after the engine has stopped, the muffler
is
still hot. Never place t h e machine near flammable
materials
(dry
grass, etc.), combustible gasses or combustible
liquids.
Pay special attention when operating in
the
rain or shortly after the rain as the ground may
be
slippery.
If
you slip or fall to
the
ground or into a hole, release the throttle lever immediately.
Be careful not to drop the machine or
hit it
against obstacles.
Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the spark plug
cap from the
spark
plug.
Before storing the machine for a long time, drain all fuel from the fuel tank and carburetor, clean the
parts, move the machine to a safe place, and confirm that the engine has cooled down.
Make periodic inspections to assure safe and efficient operation,
If
you need professional inspection o f
your machine, please contact your nearest Makita Factory Service Center or authorized dealer.
Keep the machine well away from fire or sparks.
Warning: The cutter area is dangerous while the machine is coasting to a stop.
Don't try to tackle a
big
job
with
an undersized machine. Use
this
machine only for trimming; use a lawn
mower for large areas.
Wear a
dust
mask in
dusty
work conditions.
Wear hearing protection for extended periods of use, and any time the noise
is uncomfortable.
Keep guards and protectors in place and in working order.
Never operate
this
machine while
it is
turned upside-down or when it is at an extreme angle.
CAUTION! CAUTION! CAUTION!
WHEN MIXING GASOLINE WITH TWO-CYCLE ENGINE OIL, USE ONLY GASOLINE WHICH CONTAINS NO
ETHANOL
OR
METHANOL (TYPES OF ALCOHOL), THIS WILL HELP TO AVOID POSSIBLE DAMAGE TO
ENGINE FUEL LINES AND OTHER ENGINE PARTS.
SAVE THESE INSTRUCTIONS.
3