Specifying Destinations In An Ldap Server (E-Mail) - Canon MF8580Cdw User Manual

Specifying Destinations in an LDAP Server (E-mail)

If your office has an LDAP server installed, you can use the destinations registered in the server. To specify
destinations, access an LDAP server via the machine, and then search for a destination.
NOTE
You need to specify the settings for connecting to an LDAP server beforehand.
Registering LDAP Servers (MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw Only)
1
Press .
2
Use / to select <Specify from LDAP Server>, and press
3
Select the LDAP server you are using, and press
4
Select the search criteria, and press
Personal names, fax numbers, e-mail addresses, organization names, and department names are available criteria for searching
destinations. Multiple search criteria can be specified at the same time.
5
Specify the search criteria using the numeric keys, and press <Apply>.
The following screen shows an example for when <Name> is selected in step 4 to search by personal name.
Pressing <A/a/12> toggles the input modes (except for searching by fax number).
To specify multiple search criteria, repeat steps 4 and 5.
6
Select <Search Method>, and press
.
.
.
.
0ALJ-074