Adjusting The Volume - Canon MF8580Cdw User Manual

Adjusting the Volume

The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or error occurs. You
can set the volume of each of these sounds individually.
1
Press .
2
Use / to select <Preferences>, and press
3
Select <Sound Volume Control>, and press
4
Select a setting, and press
Setting
<Fax Tone> * Sound produced during a fax transmission
*
<Ring Tone> Sound produced when an incoming fax is received
<TX Done
Sound produced when fax sending is complete
Tone> *
<RX Done
Sound produced when fax receiving is complete
*
Tone>
<Scanning Done
Sound produced when fax document scanning is complete
*
Tone>
Sound produced each time a key on the operation panel is
<Entry Tone>
pressed
Sound produced when an invalid key operation is performed,
<Invalid Entry
such as when you enter a number outside the valid setting
Tone>
range
<Restock
Sound produced when a toner cartridge is almost empty
Supplies Tone>
<Warning
Sound produced when a paper jam or other error occurs
Tone>
<Job Done Sound produced when an operation such as copying or
Tone> scanning is complete
<Energy Saver
Sound produced when the machine enters or exits sleep mode
Alert>
*
Only available for the MF8580Cdw / MF8550Cdn / MF8280Cw.
5
Use / to adjust the volume, and press <Apply>.
6
Press to close the menu screen.
.
.
.
Description
0ALJ-023
Procedure
<On> (Sound is produced)
to step 5
<Off> (No sound is produced)
Go to step 6
<On> (Sound is produced)
to step 5
<Off> (No sound is produced)
Go to step 6
<Only When Error Occurs>
to step 5
<On> (Sound is produced) or <Off>
(No sound is produced)
step 6
Go
Go
Go
Go to