Connecting The Network Cable; Software Installation - D-Link DGE-560SX User Manual

Gigabit Ethernet 1000BASE-SX(LC) PCI-Express X4 Adapter

Connecting the Network Cable

The DGE-560SX 1000Base-SX Gigabit Ethernet network adapter card enables operation over 850nm 62.5/125
fiber optic cable up to 75 meters and 850nm 50/125 fiber optic cable up to 550 meters. The network adapter card
connects to fiber optic cabling equipped with an LC Fiber Optical connector.

Software Installation

To install the driver or the D-Link Network Control Program, insert the CD-ROM in the CD-ROM drive of the
system with the installed adapter.
The D-Link Network Control Program is included with the DGE-560SX. This program is used to monitor the
adapter and create VLAN information including VLAN Identifier and name for the system in which it is
installed.
To install the D-Link Network Control Program, insert the CD-ROM in the system CD-ROM drive and click the
Install link. Follow the instructions that appear to install the program.
4