15. Place the wider portion of the saw base on that part
of
the workpiece which
is solidly supported, not on the section that will fall
off
when the cut is made.
As examples, Fig.
5
illustrates the RIGHT way to cut off the end of a board,
and Fig.
6
the WRONG way. If the workpiece is short or small, clamp
it
down.
DON'T TRY TO HOLD SHORT PIECES B Y HAND!
I
I
Fig. 5
16. Never attempt t o saw with the circu-
lar saw held upside down in a vise.
This is extremely dangerous and can
lead t o serious accidents.
Fig.
1
7