Removing Or Installing Saw Blade - Makita 5077B Instruction Manual

Removing or installing saw blade
CAUTION :
Always b e sure that the tool is switched off and unplugged before removing or installing
the blade.
To remove the blade, press the shaft lock
so that the blade cannot revolve and use
the wrench to loosen the hex bolt clock-
wise. Then remove the hex bolt, outer
flange and blade.
To install the blade, follow the removal
procedure in reverse. BE SURE TO
TIGHTEN THE HEX BOLT SECURELY.
CAUTION
:
.Be sure the blade is installed with teeth
pointing up
a t
the front of the tool.
*Use only the Makita wrenches to install
or remove the blade.
*One side of the inner flange is for
5/8"
hole diameter of the blade; the other side
is for 13/16" hole diameter.
inner flange
\
Fig. 9
Blade Outer flange
I
Fig. 1(
Use the correct side for the hole diameter of the blade you intend to use. Mounting the
blade on the wrong side can result in dangerous vibration.
a