Makita PV7001C Instruction Manual page 9

1
1. Backing pad
2. Spindle
3. Wrench
1
1. Sponge pad
2. Pad
1
3
2
1. Wool bonnet
2. Lock nut
3. Rubber pad
1
1. Lock nut wrench
2. Wrench
Installing or removing backing pad
003453
Hold the spindle with the wrench so that it cannot revolve.
Then screw the pad onto the spindle all the way. (The pad
2
can be used to install the optional sponge pad.)
To remove the pad, follow the installation procedure in
3
reverse.
Installing or removing sponge pad
003454
(optional accessory)
To install the sponge pad, first remove all dirt or foreign mat-
ter from the pad. Install the sponge pad to the pad.
2
To remove the pad, pull it off from the pad slowly.
Installing or removing the wool bonnet
003468
(optional accessory)
Mount the rubber pad onto the spindle. Screw the lock nut
onto the spindle.
To tighten the lock nut, hold the spindle with the wrench so
003469
that it cannot revolve, then use the lock nut wrench and
securely tighten clockwise.
2
9