Advertisement
PACKING AND EXAMING YOUR OVEN
24.When using the convection or combination cooking
26.Thermometer
Do not use regular cooking or oven
functions, both the outside and inside of the oven
thermometers when cooking by microwave or
will become hot. Always use hot padsto remove
containers of food and cooking accessoriessuch
as the oven shelf, round wire rack and glasstray.
25.Do not clean with metal scouring pads Piecescan
bum off the pad and touch electrical parts involving
risk of electric shock
combination
The metal and mercury in these
thermometers could causearcingand possibledamage
to the oven. Do not use a thermometer in food you are
microwaving unless the thermometer is designed or
recommended for use in the microwave oven.
Open the bottom of the carton, bend the carton flaps back and tilt the oven over to rest on plasticfoam
pad. Lift carton off oven and remove all packing materials, WALL and TOP CABINET TEMPLATES. SAVE
THE CARTON AS IT MAY MAKE INSTALLATION EASIER.
1. Remove the feature sticker from the outside of the door, if
there is one.
2. Check to see that there is a WALL TEMPLATE and TOP
CABINET TEMPLATE. Read enclosures and SAVE the Use
and Care Guide.
Check the oven for any damage, such as misaligned or bent
door, damaged
door seals and sealing surfaces,
broken or
loose door hinges and latches and dents inside the cavity or on
the door. If there is any damage, do not operate the oven and
contact your dealer or ELECTROLUX AUTHORIZED SERVICER.
See Installation Instructions for more details.
ARCING
Oven cavity
Safety door
Door seals and
latches
sealing surfaces
If you see arcing, pressthe Stop/Clear
button and correct the problem.
Arcing is the microwaveterm
for sparks in the oven.
Arcing is caused by:
o The metal shelf not installedcorrectly so it
touchesthe microwave wall.
Metal or foil touching the side of the oven.
Foil not molded to food (upturned edges act
like antennas).
Metal, such as twist-ties, poultry pins, or gold-
rimmed dishes, in the microwave.
Recycledpaper towels containing small metal
pieces being used in the microwave.
Federal
Communications
Commission
Radio
Frequency
interference
Statement
(U.S.A. Only)
This equipment generates and uses ISM frequency energy and if not installed and used properly, that is in strict
accordance with the manufacturer's
instructions, may cause interference to radio and television reception. It
has been type tested and found to comply with limits for ISM Equipment pursuant to part 18 of FCC Rules
which are designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment
does cause interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following:
Reorient the receiving antenna of the radio or television.
Relocate the microwave oven with respect to the receiver.
Move the microwave oven away from the receiver.
Plug the microwave oven into a different outlet so that the microwave oven and the receiver are on
different branch circuits.
The manufacturer
is not responsiblefor
any radio or television interference caused byunauthorized
modification
to this microwave oven. It is the responsibility
of the user to correct such interference.
Advertisement
