Advertisement
Only those involved in the work should be in the
vicinity. Children especially must be kept away at
all times.
There may be local regulations concerning noise
which must be complied with by keeping noise
levels within prescribed limits. In certain cases,
shutters should be used to contain noise.
Do not play with the contact element:
it
prevents
accidental discharge, so it must be kept on and
not removed. Securing the trigger in the
ON
po-
sition is also very dangerous. Never attempt to
fasten the trigger.
Do not operate a tool if any portion of the tool
operating controls is inoperable, disconnected,
altered, or not working properly.
Operate the tool within the specified air pressure
of
4.5
-
8.5 kgf/cm*G (65
-
120 PSIG)
for safety
and longer tool life. Do not exceed the recom-
mended max. operating pressure of 8.5
kgf/cmzG
(120 PSIG).
The tool should not be
connected to a source whose pressure potentially
exceeds
14.0
kgf/cmzG (200
PSIG).
I
I
8 5 kgf/cm2 G
8
5 kgf/cm2G
(120
PSIG)
(120 PSIG)
4
Advertisement
