Advertisement
Nose adapter
CAUTION:
Always lock the trigger and disconnect the hose before installing or removing the nose adapter.
When nailing workpieces with easily-marred surfaces, use
I
I
Nose piece storing portion
Attach the nose adapter to the contact arm (see right). When
not in use, store the nose adapter at the rear of the tool to
keep it from being lost.
1
Nose
adapter
Loading nailer
CAUTIO N :
Always lock the trigger and disconnect the hose before loading the nailer.
Select nails suitable for your work.
Depress the latch lever and open the door and magazine
cap.
Lift and turn the coil support plate to set the correct step.
When loading 90 mm (3-1/2") long nails, use the bottom
step. When loading 65 or 75 mm (2-1/2", 3") long nails, use
the middle step. When loading 45 or 50 or 57 mm (1-3/4",
2",
2-1/4") long nails, use the top step. If the tool is operated
with the coil support plate set to the wrong step, poor nail
feed or malfunction of the tool may result.
L
Magazine cap
1
DoorJ
L-Latc,
lever
7
Magazine scale
Coil support plate
12
Advertisement
