Advertisement
Emptying rear bag
1. Release the switch lever.
2.
Turn
off
the interlock switch and remove the key
3. Open the rear guard.
4.
Hold the rear bag handle and remove the rear bag from the mower.
5 . Empty the grass from the rear bag.
Rear guard
-
Rear bag
WARNING:
To reduce risk of injury, inspect rear bag frequently and replace with recommended
replacement if there are signs for wear or deterioration.
Installing mulching plate
1. Turn off the interlock switch and remove the key. If you are recharging the mower, stop
recharging and disconnect the charging plug.
2. Turn the mower on its side to expose the blade.
3. Install the two protrusions of the mulching plate into the holes in the deck. Push the
mulching plate into the discharge opening until the hook of the mulching plate is held by
the undercover. Open the rear guard and make sure that the hook of the mulching plate
is properly held by the undercover.
WARN IN G :
Always install the mulching plate when operating the mower with the rear bag removed.
I
12
Advertisement
