Makita N900 Instruction Manual page 5

Installing side grip (auxiliary handle)
Screw the same grip on the tool securely.
Installing or removing depressed center wheel
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the wheel.
Screw the inner flange onto the spindle. Fit
the wheel on over the inner flange and screw
the
lock
nut onto the spindle.
Lock nut
Depressed
center wheel
CAUTION:
When installing the depressed center wheel,
screw the inner flange onto the spindle
so
that the side with hub 16 mm (5/8") in out-
er diameter faces toward the depressed
center wheel.
When installing the diamond wheel or
abrasive disc, screw the inner flange onto the
spindle so that the side with hub 2 0 mm
(25/32") in outer diameter faces toward the
diamond wheel or abrasive disc.
5