Additional Safety Instructions For Sanders - Black & Decker BPRS3102 Pro Line Instruction Manual

ENGLISH
c. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tools operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous
situation.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
6. Electrical safety
This tool is double insulated; therefore no earth
wire is required. Always check that the power
supply corresponds to the voltage on the rating plate.
Warning! If the power cord is damaged, it must
be replaced by the manufacturer, authorized
Black & Decker Service Center or an equally
qualified person in order to avoid damage or injury. If the
power cord is replaced by an equally qualified person, but
not authorized by Black & Decker, the warranty will not be
valid.
4
7. Labels on tool
The label on your tool may include the following symbols:
Read Hz .......
Instructions
W .......
Manual
min .....
Use Eye
Protection
.....
Use Ear
Protection
.....
V ........ Volts
A ........ Amperes n ....... No-Load
0

Additional safety instructions for sanders

Warning! Contact with or inhalation of dusts arising from
sanding applications may endanger the health of the operator
and possible bystanders. Wear a dust mask specifically
designed for protection against dust and fumes and ensure
that persons within or entering the work area are also
protected.
• Thoroughly remove all dust after sanding.
• Take special care when sanding paint which is possibly
lead based or when sanding some woods and metal
which may produce toxic dust:
- Do not let children or pregnant women enter the work
area.
- Do not eat, drink or smoke in the work area.
- Dispose of dust particles and any other debris safely.
Features
This tool includes some or all of the following features.
1. On/off switch
2. Lock-on button
3. Dust extraction outlet
4. Sanding base
5. Paper clamp lever
6. Variable speed control knob
...... Class II
Hertz
Construction
Watts
...... Earthing
Terminal
minutes
...... Safety
Alternating
Alert Symbol
Current
.../min.. Revolutions
Direct
or Recipro-
Current
cation per
minute
Speed