Table of Contents
Advertisement
4 Using Your IP Phone
Placing or Answering Calls
To place or answer a call, you can pick up the
handset, press the
Speaker
press a line button (on some phones).
Putting a Call on Hold
To put a call on hold, press the
caller hears a series of three rapid beeps or music
while on hold.
To resume the call, press the flashing red line
button for the call. For the SPA502G, press the
resume softkey.
Ending a Call
If you are using the handset, hang up or press
the EndCall softkey (on some phones). If you
are using the speakerphone, press the Speaker
button. If you are using the headset, either
press the Headset button (wired) or replace the
handset (wireless).
Cisco SPA 50X Quick Start guide
Connecting your business to the things that matter
www.kcbusiness.co.uk
or
Headset
button, or
Hold
button. The
Adjusting Volume and Muting
To adjust the volume of the handset or speaker,
lift the handset or press the speaker button. Press
+
on the Volume button to increase the volume,
or press
-
to decrease the volume. Press Save.
To adjust the ringer volume, press the
button when the handset is on the phone and the
speaker button is off. Press Save.
To mute the phone microphone, speaker, or
headset microphone, press the
the phone. The button glows red. Press the
button again to unmute.
Volume
Mute
button on
Mute
Business
12
Advertisement
Table of Contents
