Chapter
•
(Basic operation
Keep moving upward or downward;
Changes the map scale continuously.
o
This operation is available only while the
map screen is displayed.
Moving MULTI-CONTROL to the left or
right;
Allows you to change the frequency one
step at a time; operates track search con-
trols.
Keep moving MULTI-CONTROL to the
left or right;
Allows you to perform manual seek tuning,
fast forward or reverse.
Pressing the center of MULTI-CONTROL;
Enables you to start the voice operation
when "English" is selected in "Program lan-
guage:". (When a language other than
"English" is selected, pressing the center al-
lows you to hear the previous route gui-
dance.)
o
When your phone is paired to the naviga-
tion system, pressing its center allows
you to answer an incoming call or end
the phone call.
Keep pressing the center of MULTI-CON-
TROL;
Mutes the AV (Audio and Video) source. To
cancel the muting, press and hold it again.
®
Bluetooth connection status indicator
Lights up when your phone is paired to the
navigation system by Bluetooth wireless
technology.
®
"AV2" input jack
This is the "AV2" input terminal. Use the
CD-RM10 (sold separately) to connect the
external video component.
o
To connect your iPod by using USB inter-
face cable for iPod (CD-IU230V), use
"AV1" input (RCA) on the backside.
@l SO
card slot
:>
For more detailed information, refer to in-
serting and ejecting an SO memory card
on this page. (!)
(ill
En
)
Inserting/ejecting a disc
Inserting a disc
•
Insert a disc into the disc loading slot.
o
The built-in drive plays one standard 12-cm
or 8-cm (single) disc at a time. Do not use
an adapter when playing 8-cm discs.
o
Do not insert anything other than a disc
into the disc loading slot.
Ejecting a disc
•
Press EJECT button.
The disc is ejected.(!)
Inserting and ejecting an
SO memory card
A
CAUTION
• Keep the dummy SO card out of the reach of
small children to prevent them from acciden-
tally swallowing it.
• To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
• If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.