Switching The Reception Mode; Switching The Seek Mode - Pioneer AVIC-F700BT Operation Manual

Chapter
C_U_S_i_"=9_t_h_e_H_D_Ra_d_i_o_<-,--D---,i9=-i_ta_I_R_a_d_io-=-)---------) •
®
Switching the seek mode
:;, For details, refer to this page.
®
Tuning in strong signals
:;, For details, refer to this page.
@) Switching the reception mode
:;, For details, refer to this page.
Storing the strongest broadcast
frequencies
"85M" (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys [Pl] to
[P6] and, once stored there, you can tune in to
these frequencies with the touch of a key.
• Touch [Start] to turn BSM on.
85M begins to flash. While 85M is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys [Pl] to
[P6] in order of their signal strength. When
this is complete, 85M stops flashing.
o To cancel the storage process, touch
[Stop].
o Storing broadcast frequencies with 8SM
may replace broadcast frequencies you
have already saved by using [P1] to [P6].
Switching the seek mode
You can select the method of seek tuning.
• Touch [Seek] to select the desired set-
ting.
• [All]:
Seeks stations from both analog and digital
broadcasting.
• [HO]:
Seeks from digital broadcasting only.
o If you select "HD" on this setting while
[Blending] is set to "Analog", the setting
on [Blending] turns to "Digital-Analog
auto" automatically.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [Off].
2 Touch [.... Prev] or
[Next~]
to set the sen-
sitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM:1-2-3-4
AM: 1-2
o The FM "4" (AM "2") setting allows recep-
tion of only the strongest stations, while
lower settings let you receive weaker sta-
tions.
Switching the reception mode
If a digital broadcast reception condition gets
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
in default. If you want to prevent a frequent
automatic switching, switch this setting to
[Analog].
• Touch [Blending] to switch the recep-
tion mode.
• [Analog]:
Receives analog broadcasting only.
• [Digital-Analog auto]:
Automatically switches to the analog broad-
cast of the same frequency level as the digi-
tal broadcast.
o If you select "Analog" on this setting while
[Seek] is set to "HD", the setting on [Seek]
turns to "All" automatically.
0
En (105)