Introduction
Some troubleshooting and maintenance
procedures for cellular phones require
disassembly of the phone to gain access to
internal components. Reasonable care
should be taken to avoid damaging or
stressing
the
housing
components
during
reassembly.
Many of the integrated circuit
devices used in this equipment
are vulnerable to damage from
static charges. An anti-static
wrist band, connected to an anti-
static (conductive) work surface,
must be worn during all phases
of
disassembly,
reassembly.
and
internal
disassembly
CAUTION
repair,
and
Motorola Confidential Proprietary
Recommended Tools
The following tools are recommended for use
during the disassembly and reassembly of
the TDMA Modulus 3.
• Anti-Static
includes:
Anti-Static Mat
q
and
Ground Cord
q
Wrist Band
q
T6 Torx driver
•
Disassembly
Mat
Kit
(RPX-4307A);
53