Advertisement
15.
Place the wider portion of the saw base o n that part of the workpiece which
is solidly supported, not on the section that will fall off when the cut is made.
As examples, Fig.
5
illustrates the
RIGHT
way t o cut off the end of a board,
and Fig.
6
the WRONG way. If the workpiece is short or small, clamp
it
down.
DON'T
TRY TO HOLD
SHORT PLACES BY HAND!
Fig.
Fig.
circular saw held upside down in a
vise. This is extremely dangerous and
can lead t o serious accidents.
I
Fig.
'
17. Before setting the tool down after completing
a
cut, be sure that the lower
(telescoping) guard has closed and the blade has come t o a complete stop.
7
Advertisement
