Switch Action; Speed Change - Makita 2106 Instruction Manual

Switch action
To start the tool, simply pull the trigger.
Release the trigger to stop. For continuous
operation, pull the trigger and then push in
the lock button. To stop the tool from the
locked position, pull the trigger fully, then
release it.
I
Lock button
1
1
1
Trigger switch
CAUTION
:
Before plugging in the tool, always check to see that the trigger switch actuates properly
and returns to the "OFF" position when released.
Speed change
To change the tool speed, press the
side of the speed change switch for
speed or the "L" side for low speed.
"H"
high
CAUTION :
Do not change the tool speed while the motor
is
running.
5