Advertisement
Specific Safety Rules
1. Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact
with
a "live" wire
will
also make exposed metal parts of the tool "live" and shock the operator.
2. Be aware that this tool is always
in an operating condition, because it does
n o t have t o be plugged into an electrical outlet.
3.
Always be sure you have a firm footing.
Be sure no one is below w h e n using the tool in high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do
n o t leave the tool running. Operate the tool only when hand-held.
7. Do
not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
4
Advertisement
