Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER AND TOOL
1. The Charger and the tool are specifically designed to
work
together.
Do
not
attempt to charge any other cordless tool with this Charger. Do not attempt
to charge the tool with any other charger.
2.
Do not charge the tool when temperature is BELOW 10°C (5OOF) or ABOVE
4 5 O C (113OFI.
3.
Do not use charger in damp or wet locations.
4.
Do not attempt to use a step-up transformer, an engine generator or DC
5. Do not store the tool in locations where the temperature may reach or exceed
6. Do not incinerate the tool even if it is severely damaged or is completely
7 . Be aware that this tool is always in an operating condition, because it does
8. Always be sure you have a firm footing.
9. Hold the tool firmly.
power receptacle.
5OoC (122OF).
worn out. The tool can explode in a fire.
not have to be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
IO. Keep hands away from rotating parts.
1 1. When drilling into walls,
floors or wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the plastic handle or plastic tool body to prevent electric
shock if you drill into a "live" wire.
12.
Do not leave the tool running. Operate the tool only when hand-held.
13. Do not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
5
Advertisement
